Quantum-composers 9250 Series Manual de usuario descargar pdf (Pagina 41)

9250 Manual Version 1.2 | Quantum Composers

:ENable

0/1 or OFF/ON

Turns on/off Bluetooth

module. Disables Bluetooth

transmitter. This state is not

saved and will default to on

when power is cycled.

*Note: Command not

available on units without

Bluetooth option.

:ECHo

0/1 or OFF/ON

Command to enable/disable

the echo function on the

Bluetooth interface. The Echo

function will cause the unit to

repeat the command received

to the PC.

*Note: Command not

available on units without

Bluetooth option.

:MAC

Returns the Bluetooth MAC

address.

:AUTorun

0/1 or OFF/ON

When the unit is powered up,

if this command is enabled,

the unit will start pulsing

automatically.

:VERSion

Query only. Returns SCPI

version number in the form

YYYY.V for ex. 1999.0

IEEE 488.2 Common Commands

Command:

Parameter Range:

Notes:

*IDN

Query only. Returns model, serial number, firmware version, and FPGA

version numbers.

*RCL

0 - 6

Recalls configuration from specified storage location

*RST

RESET. Resets parameters, same as *RCL 0

*SAV

1 - 6

Saves current parameters to desired storage location

*SER

Serial number query.

*TRG

Creates a soft trigger input.

*ARM

Resets all channel counters simultaneously when the channels are in either

single shot or burst mode.

*Note: The system must be in continuous mode (this command is functionally

the same as pressing the Run/Stop button).

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 50 51

Comentarios a estos manuales

Sin comentarios

Quantum-composers 9250 Series Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Generadores Quantum-composers 9250 Series