Quantum-composers 9530 Series Manual de usuario descargar pdf (Pagina 54)

Page 54 9530/8530 Manual Version 4.8

generator and communication hardware are functioning properly. From here, a specific

application in whatever preferred programming language can be built.

Although Quantum Composers cannot support all programming languages, we do have extensive

experience with many languages, and strive to provide whatever assistance we can. Contact QC

technical support for the latest information on what assistance may be available for your

application.

12. Appendix E - Dual Trigger Input

DT15 Dual Trigger Module

*Note: Dual Trigger Mode and Incrementing mode are mutually exclusive.

This module option allows the “Gate” input to function as a second trigger input. For consistency,

the enabling menu for this option is located under the “Trig” menu structure. Once the dual trigger

mode is enabled, both the “Gate” and “Trig” inputs can act as trigger inputs.

Adjustments for the “Gate” functioning as a trigger input are located under the “Gate” menu

structure. The voltage threshold level and trigger edge for the “Gate” input can be adjusted from this

menu. The “Gate” trigger edge choice is only available when in dual trigger mode.

Once dual trigger functionality is enabled on the unit, each channel can be assigned to either of the

trigger inputs. The default trigger source for each channel is the “Trig” input. The trigger source

selection is accessed in the secondary channel menus. To access this menu, press the button for

the channel of interest twice. Continue to press then the Page button until the menu page with “Ch

Gate:” and “TrigSrc:” appears. Use the “Next” button to place the cursor on the “TrigSrc” line and

use the up/down arrows to change to the desired trigger source.

9530 SCPI Dual Trigger Command Summary

Keyword:

Command:

Sub-

Command:

Parameter Range:

Notes:

:PULSe[0]

Command to change the units’ global settings,

this is the same as using the :SPULse

command

:TRIGger

Command to change the units’ global trigger

settings.

:MODe

DIS / TRIG / DUAL

Sets the unit to dual trigger mode.

:PULSe[1/2/n]

Command to change the units’ channel

specific settings.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 70 71

Sin comentarios

Quantum-composers 9530 Series Manual de usuario Pagina 54