Quantum-composers 9730 Series Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
8-18
Channel Test Menu (FUNC + A, B, C, or D)
Page0
o Line0 empty
o Line1 PreTest: Disabled
o Line2 empty
o Line3 empty
Page0 Alt
o Line0 empty
o Line1 PreTest: Enabled
o Line2 PreMeas: “measured resistance”
o Line3 empty
Page1 (Only available when PreTest is Enabled)
o Line0 empty
o Line1 PreMax: <pretest maximum resistance>
o Line2 PreMin: <pretest minimum resistance>
o Line3 IPreMax: <pretest measurement current>
Setting Channel Pre-Test Parameters
PreTest: Enables or disables pre resistance test and requirements for
the channel.
PreMeas: Displays the measured resistance from the last run pre-test.
PreMax: Sets the maximum resistance allowable for pulse generation.
PreMin: Sets the minimum resistance allowable for pulse generation.
IPreMax: Sets the test current for measuring the resistance.
Page2
o Line0 empty
o Line1 PostTest: Disabled
o Line2 empty
o Line3 empty
Page2 - Alt
o Line0 empty
o Line1 PostTest: Enabled
o Line2 PstMeas: “measured resistance”
o Line3 TstType: Standard, Outside, Outside Pre
Page3 (Only available when PostTest is Enabled)
o Line0 empty
o Line1 PstMax: <post-test maximum resistance>
o Line2 PstMin: <post-test minimum resistance>
o Line3 IPstMax: <maximum test current>
Setting Channel Post-Test Parameters
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

Comentarios a estos manuales

Sin comentarios