Quantum-composers 9500 Plus Series Manual de usuario descargar pdf (Pagina 26)

Setting Keypad Parameters

The rate at which a key will repeat itself when pressed down may be set. This

can be used to provide a controlled rate at which a parameter is incremented. In

addition, the volume of the beep can be controlled for both the keypad and the

adjustable knob.

Key Rate: Sets the rate at which the keys will repeat when held

down.

Key Vol: Sets the beep volume for the keypad.

Knob Vol: Sets the beep volume for the Rotary Knob.

Setting the Auto Start Mode

The unit may be configured to automatically start generating pulses after power

up.

Setting the Display Decimal Mark

Mark: Selects the format of the decimal mark, “.” or “,”.

Setting the Display Brightness

LCD: Adjusts display brightness.

Store Menu

Store

Configuration

Name

Help

Line

Storing a Configuration

Use the following procedure to store a complete system configuration:

• Set all parameters to the desired value.

• Select a configuration number.

*NOTE: You cannot store to the zero location, as that contains the factory

default values.

• Label the configuration as desired.

• From the Store menu, press the store button sequence (function + store).

*NOTE: When the unit powers up it will recall the last stored or recalled

configuration. Any changes to the configuration which were not saved are not

restored.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 69 70

Sin comentarios

Quantum-composers 9500 Plus Series Manual de usuario Pagina 26