Quantum-composers 9500 Plus Series Manual de usuario descargar pdf (Pagina 57)

The “Clock Out” BNC connector will output a signal dependent on the current

configuration. If the “Clock In” parameter is enabled, the 10 MHz signal present

on the Clock in BNC will also be present (and synchronized) on the Clock Out

connector. If Clock In is disabled and Clock Out is enabled, the 9500+T will

generate and output a 10 MHz signal intended for synchronizing other

instruments. If the Clock Out parameter is disabled, the system pulse (T ) will

be present on the output BNC connector, showing whatever frequency is being

generated in the current setup.

Mode Menu

To access the Oscillator menu unique to the “T” option instrument, press the

“Function-Mode” key sequence twice. The first set will enter into the standard

channel mode menu, and the second sequence will enter the Clock In/Out menu.

To Mode Oscillator Menu

System Mode Oscillator Out Enable

Oscillator In Enable

Serial Commands

Keyword

Lower-Level

Keyword

Parameter

Std /

New

Comments

:SPULSe

:ICLock 0 / 1 or OFF / ON New

Enables / Disables lock to 10 MHz

signal. Can be set to "1" or "0"

(Enable or Disable, respectively).

Query returns "

:OCLock 0 / 1 or OFF / ON New

Enables / Disables output 10 MHz

signal. Can be set to "1" or "0"

(Enables or Disable, respectively).

Query returns "Enabled" or

"Disabled"

:PULSe [1 / 2n]

:MUX ENABle / DISable New

Enables / Disables Multiplexing.

Multiplexing is implemented in

channel pairs. Channel A can be

combined with Channel B, just as

Channel C can be combined with

Channel D, etc.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 69 70

Comentarios a estos manuales

Sin comentarios

Quantum-composers 9500 Plus Series Manual de usuario Pagina 57

Comentarios a estos manuales

Relacionado con productos y manuales para Generadores Quantum-composers 9500 Plus Series