Quantum-composers 9500 Plus Series Manual de usuario descargar pdf (Pagina 58)

Clock IN / Clock Out Signal Specifications

Frequency: 10 MHz +/-25 PPM

Duty Cycle: 50% +/-5%

Level (In & Out): TTL/CMOS

Deviations from 9500+ Specifications

PULSE GENERATION

Multiplexer

Described on p. 1 of this Appendix.

Delay 0 - 5 s

Pulsewidth 10 ns - 5 s

INTERNAL RATE GENERATOR

Rate (T

PERIOD) 50 ns to 1000 s (.0002 Hz to 20 MHz)

Optical Outputs and Inputs

The optical output model differs from the standard units as follows:

Optical Outputs: The optical outputs utilize Agilent HFBR-1412 optical

connectors. Complete specifications can be down-

loaded from Avago Technology’s website

(www.avagotech.com). Pertinent specifications are:

- Wavelength: 820 nm

- Signal rates up to 5 MBd

- Link distances up to 1.5 km

- ST connector type

- Resolution: 500 ps

- Accuracy: 1 ns + .0001 x Delay

Optical Inputs: - Wavelength: 820 nm

- Signal rates up to 5 MBd

- Link distances up to 1.5 km

- ST connector type

- Resolution: 500 ps

- Accuracy: 2 ns + .0001 x Delay

- Optical Trigger: 2412

- Trigger Delay: < 300 ns

- Jitter: <15 ns

System Mode: Increment

The System Increment modes are a pair of special modes, which allow the delay

and width of each channel to be incremented at the end of a burst of pulses.

Each channel is independent and each may be set with different initial values

and different values for the step size for both the delay and the pulsewidth.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 69 70

Sin comentarios

Quantum-composers 9500 Plus Series Manual de usuario Pagina 58